Victron Energy BlueSolar PWM DUO LCD USB 12/24V-20A kontroler za punjenje baterija
Victron Energy
SCC010020060
plus trošak dostave
    Vrijeme dostave:1-3 radna dana
Dodaj u košaricu
  • Opis
  • Više

Victron Energy BlueSolar PWM DUO LCD USB 12/24V-20A kontroler za punjenje baterija
Profesionalna energija
Punjač baterija
DC-AC pretvarači
Kombinirani pretvarač / punjač
DC-DC pretvarač
Izolirani transformatori baterija
Monitori baterija
Diode i FET razdjelnici
Zaslon s tekućim kristalima
Dva USB izlaza od 5 volti
Funkcija upravljanja rasvjetom, potpuno programabilna
Trostupanjsko punjenje baterije (masivno, apsorpcijsko, plutajuće), potpuno programabilno
Izlaz opterećenja s niskim naponom i ručnim isključivanjem (programabilno)
Izlaz opterećenja zaštićen od preopterećenja i kratkog spoja
Zaštićen od spajanja obrnutog polariteta solarnih panela i/ili baterije
Puni dvije odvojene baterije
Programabilni omjer struje punjenja
U kompletu: vanjski senzor za temperaturu
Dimenzije: 102 x 184 x 48 mm
Jamstvo: 5 godina

SCC010020060   5.2024.

PWM12/24-20A KONTROLER ZA PUNJENJE BATERIJA
Professional Energy - BlueSolar PWM DUO-LCD&USBLiquid Crystal DisplayTwo 5 Volt USB outputsLighting control function, fully programmable  Three stage battery charging (bulk, absorption, float), fully programmableLoad output with low voltage and manual disconnect (programmable)
Load output protected against over load and short circuit
Protected against reverse polarity connection of the solar panels and/or battery
Charges two separate batteries
Programmable charge current ratio
External Temperature sensor
BlueSolar PWM-DUO LCD-USB - 12/24-20   Battery Voltage:  12/24 V with automatic system voltage detection   [for LiFePO4 no automatic system voltage detection]   Rated charge current: 20A  
Second battery output: Yes  
Load output: 2 USB ports 5V/2A  
Automatic load disconnect: 10.5V/21V  
Maximum solar voltage: 28V / 55V (*1)  
Self-consumption: 10 mA  
Protections: Battery reverse polarity (fuse) Over temperature  
Grounding: Common negative  
Operating temp. range: -35 to +55°C (full load)  
Humidity (non-condensing): Max 95%  
 DEFAULT SETTINGS  
Charge voltage 'absorption' (*2): 14.4V / 28,8V  
Charge voltage 'float' (*2): 13.7V / 27,4V
Battery temperature sensor: Yes, remote sensor [included]  
Temperature compensation: -30mV/ºC / -60mV/ºC  
ENCLOSURE  
Protection class: IP20  
Terminal size: 16 mm² / AWG6  
Weight: 0,3kg
Dimensions (h x w x d): 101.5 x 184.0 x 47.1 mm [4.0 x 7.4 x 1.8 inch]  
STANDARDS  
Safety: IEC 62109-1  
EMC: EN 61000-6-1, EN 61000-6-3, ISO 7637-2  
*1) For 12V use 36 cell solar panels  
 For 24V use 72 cell solar panel or 2x 36 cell in series  
*2) See manual for alternative voltage settings